|Feeding of Job||Automatic|
|Clamping Declamping of Job||Automatic|
|Lifting of Arm||Automatic|
Saw head unit is supported by two rigid hard-chrome plated & ground vertical columns, which are guided by self lubricated bushes. The blade is guided by bearings & carbide wear pads. The blade can be tightened and released hydraulically. The blade is hydraulically tightened up to recommended tensile strength of the saw blade. The saw is driven by sufficient drive power to cut material.
Automatic Work Height Control
The quick approach arm eliminated the need for the operator to manually adjust the blade height to accommodate different sizes of the material. The blade will approach the material rapidly until the arm make contact, when the saw starts cutting.
Saw head up & down motion is controlled by hydraulic cylinder and regulated by a pressure compensated flow control valve.
Blade Guide system
The guide ensures accurate cutting & long blade life. They are factory set. It consists of spring loaded, self-adjusting carbide faced inserts. Adjustment screws are provided to allow easy blade changing. The blade is guided by roller bearings & carbide wear pads.
This is controlled by hydraulic cylinder & valves. The jaws of the front & rear vices are in one straight line and perpendicular to the blade. The movement of jaws of both the vices is controlled by hydraulic cylinder & valves.
Split Front Vice
This unique vice design permits the work piece to be automatically indexed. The vice securely clamps the work piece on both side of the cut thus minimizing drop off burrs. This design is most suitable for nesting or bundle cutting and is ideal for cutting short length pieces.
Shuttle type automatic feeding material system
The automatic feeding of job is also done by indexing. The feed length can set by means of screw & digital counter assembly with length accuracy of +/- 0.2mm. The hand wheel is provided to set the cutting length up to 350mm which can be read on digital counter in increment of 0.1mm. The multiple strokes make it possible to multiply the number of index cycles when pieces longer than 350mm are required. (Available in DCA Automatic machines).
Hydraulic Bundle Cutting attachment
A nesting fixture set consists of hydraulically operated vertical clamps which are mounted on the rear and front vices. This makes it possible to cut multiple pieces at a time.
Power driven wire brush
The power driven brush keeps the blade teeth free from chips for smoother cutting & increase the performance and life of the blade.
- V-belt & Step Pulley
- One piece of Bi-metal Blade with each machine
- Power driven wire brush for continue cleaning bi-metal blade
- Shuttle type automatic feeding material system
- Automatic working height control device & fast approach
- Hydraulic vice clamping / declaiming device
- Hydraulic blade tension and blade breakage detector device
- PLC base control system
- Automatic chip conveyor system
- Infinitely variables speed control by A.C. frequency drive
- Hydraulic bundle cutting attachment
- Job roller stand (1 meter long)
- Chip removing wire brush
- Bi-metal blade
- Centralized lubrication system
|MODELS||KE-241 DCA||KE-311 DCA||KE-421 DCA|
|Capacity Round & Square||241 mm||311 mm||421 mm|
|Blade Dimensions in mm||3760 x 27 x 0.9||4100 x 34 x 1.1||5450 x 41 x 1.3|
|Blade Speed meter/min||20 / 35 / 55 / 75||20 / 35 / 55 / 75||20 / 35 / 55 / 75|
|Drive motor 440v AC 3 phase||2 HP 1440 RPM||3 HP 1440 RPM||5 HP 1440 RPM|
|Hydraulic drive 440v AC 3 phase||1 HP 1440 RPM||1 HP 1440 RPM||2 HP 1440 RPM|
|Coolant Pump 440v AC 3 phase||0.15 HP 440 Volts||0.15 HP 440 Volts||0.15 HP 440 Volts|
|Wire brush 440v AC 3phase||0.25 1440 RPM||0.25 1440 RPM||0.25 1440 RPM|
|Bundle cutting Capacity||210 x 150||300 x 150||420 x 150|
|Hyd tank ltrs||80||80||100|
|Coolant Tank in ltrs||60||60||80|
|Dim in mm LxWxH||2250 x 2125 x 1275||2425 x 2850 x 1275||2425 x 3375 x 1575|
|Mac Weight||1960 KG||2300 KG||2650 KG|
(a) For optimum performance of bandsaw machine, Bandsaw Blade selected as per the geometry and grade of the materials. Please consult blade manufacturer or refer our instruction manual
(b) In view of continues development, all specification, dimensions and design characteristics shown in this site, subject to change without any notice
(c) Discount not valid for Extra & Optional Accessories